MTS Criterion 60 - Manual - Manual (Page 19)

Description
MTS Criterion™ Series 60 Product Manual Introduction 19
Mixing different brands of hydraulic fluid can affect the system
performance.
Contaminated hydraulic fluid can cause premature wear of the hydraulic
components in your system.
Do not mix different brands of hydraulic fluid. MTS System Corporation
recommends using Exxon Mobile DTE-25.
Computer
The computer is also an integral part of the system. It runs the testing software
which provides full machine control, data acquisition and management, and
advanced data analysis and presentation. MTS has minimized the amount of
custom electronics required for your system, thereby making it flexible and
reliable. This is done by connecting the frame and the computer via standard
USB 2.0 connectors. See the computer configuration below:.
Integrated Operations Platform Properties
P ARAMETERS 64.305/64.305E 64.605/64.605E/
64.106/64.106E
Pump motor rating 1.5 kW (2.0 hp) 2.2 kW (2.9 hp)
Maximum
continuous pressure 23 MPa (3300 psi) 23 MPa (3300 psi)
Maximum flow
capacity (50 Hz) 3.3 L/min (0.9 gpm) 5.1 L/min (1.3 gpm)
Maximum flow
capacity (60 Hz) 4.0 L/min (1.0 gpm) 6.2 L/min (1.6 gpm)
Filtration 5 microns nominal 5 microns nominal
Reservoir capacity 85 L (22.5 gal) 85 L (22.5 gal)
CAUTION
Monitor and Computer Configuration
D ESCRIPTION
Monitor
Model L1710A
Brand Lenovo Panel
Size 17 inch
Max Resolution 1280×1024
Description Thinkvision LCD
Industrial PC
Model ACP-4000