MTS Criterion 60 - Manual - Manual (Page 21)

Specifications
MTS Criterion™ Series 60 Product Manual Introduction 21
Specifications
This section provides general specifications for the MTS Criterion Series 60
system and illustrations of the test table and platen transition plate.
General Specifications – Frame
The following specifications are for all MTS Criterion Series 60 frames.
Specifications for the specific models are in the following tables.
MTS Criterion Series 60 Specifications
P ARAMETER S PECIFICATION
Environmental For indoor use only
Temperature 5-40°C (41°F-104°F)
Relative humidity 5-85%, noncondensing
Altitude For use at altitudes up to 2000 m
(6500 ft)
Power 400 V AC 50 Hz or 480 V AC 60 Hz
Insulation over voltage Category II
Pollution degree 2