MTS Criterion 60 - Manual - Manual (Page 85)

MTS Criterion™ Series 60 Product Manual Maintenance 85
Maintenance
Routine Maintenance Overview Checklist
Recommended Service
C ALENDAR T IME U SING 8 H OUR R UNNING T IME R ATE P ER D AY D AILY W EEKLY A NNUALLY
RUNNING TIME-HOURS 8 40 2000
Shunt cal check
X *
Clean work area/machine surface/jaw X
Verify limits and Emergency Stop X
Inspect cable/connections X
PC Maintenance
Back up testing software files (*.reg/.cal files) MTS †
Defragment hard drive MTS
System Inspection
Inspect/clean controller MTS
Inspect cable connections MTS
System Checks
Check Emergency Stop MTS
Check piston travel limit MTS
Check crosshead upper limit MTS
Check crosshead lower limit MTS
Check load cal/shunt cal MTS
Check lead screw nuts MTS
Lubrication
Cushion plates and wearable plates of the grip
(molybdenum disulfide grease) MTS
Driven parts of lower crosshead (lubricating grease) MTS
Frame, Integrated Operations Platform and Work Area
Clean/replace air filter, suction filter, high-pressure line
filter MTS