Motion control, Motion control 79 – MTS Criterion 60 - Manual User Manual
Page 79
![background image](/manuals/568018/79/background.png)
MTS Criterion™ Series 60 Product Manual
Operation
79
Motion Control
Controls and Indicators
#
C
ONTROL
/I
NDICATOR
D
ESCRIPTION
1
Machine active indicator
When this indicator is lit the machine is active and could move
unexpected.
2
Crosshead up
Jog button. Press this button to move the crosshead up.
3
Crosshead down
Jog button. Press this button to move the crosshead down.
4
Upper grip control button
Three-position switch. Switch left to close the upper grip, switch right
to release the upper grip, and switch to the middle position to hold the
upper grip.After power up to clear interlocks both grip controls must be
in the hold position. The grip controls should only be operated when
the manual interface (handset) is enabled. When the manual interface
is not enabled, moving the grips to a position that would cause motion
when the interlocks are cleared or the manual interface is enabled will
cause an interlock. If you can not remember the original position of the
grip controls you can move both grip controls to the hold position to
clear the interlock.
1
2
3
4
5
6