MTS Criterion 60 - Manual - Manual (Page 78)

MTS Criterion™ Series 60 Product Manual 78 Operation
Integrated Operations Platform Control Panel
Integrated Operations Platform Controls and Indicators
#
C ONTROL /I NDICATOR D ESCRIPTION
1 Emergency Stop During an emergency, press the button to stop all motions of the
system.
2 Power supply Select position “1” to turn the power on. Select position “0” to turn off
the power.
3 Power indicator When the power is on, the indicator lights.
4 Start pump Start the hydraulic pump motor.
5 Stop pump Stop the hydraulic pump motor.
6 Fault indicator When a hardware failure in the system is detected this indicator lights.
Please stop using the machine and contact MTS service for support.
7 Dirty oil indicator This indicator lights when the oil filter is too dirty. Check and change
the oil filter or high-pressure filter, or change the oil if necessary.
1 2 3 4 5 6 7