Connecting hoses, Connecting hoses 72 – MTS Criterion 60 - Manual User Manual
Page 72
Advertising
MTS Criterion™ Series 60 Product Manual
72
Connecting Hoses
Installation
Connecting Hoses
Before connecting hoses, first check to see if the seal of the joints is damaged.
Secondly, check to see if there is any foreign matters; clean it if there is. Connect
the frame with the Integrated Operations Platform by the oil hoses according to
the numbers on the joints.
The tapered joint seal cannot withstand excessive force.
Over-tightening may damage the tapered joint.
Ensure that you only tighten the joint only with moderate force.
CAUTION
Advertising