SATEC RDM172 Manual - Manual (Page 98)

Chapter 4 PAS Application Software Configuring Communication Protocols
98 Series PM172 Powermeters
A hysteresis for the return threshold is 0.05 Hz for
frequency and 2% of the operating threshold for all other
points.
4. Check the “Ev On” box for the points you wish to be
included into event poll reports.
5. In the “Ev Class” box, select the event poll class for the
change event points.
6. Repeat these steps for all points you want to be monitored
for events.
Click Send to download your setup to the meter.