Rockwell Automation 20D PowerFlex 700S Phase II Drive Frames 1...6 Installation Instructions - Manual (Page 5)

Rockwell Automation Publication 20D-IN024C-EN-P - July 2013 5
PowerFlex 700S Adjustable Frequency AC Drive - Phase II Control
Additional Resources These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/literature/ . To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Resource Description
PowerFlex 700S Drives with Phase II Control
Programming Manual, publication
20D-PM001
Provides the following detailed information:
• Drive start-up instructions
• Parameters and programming
• Faults, alarms, and troubleshooting
• Human Interface Module (HIM) Operation Instructions
PowerFlex 7-Class HIM (DPI) Quick Reference,
publication
20HIM-QR001
Provides a quick reference guide for using the PowerFlex 7-
Class HIM.
PowerFlex 700S Drives with Phase II Control Reference
Manual, publication
PFLEX-RM003
Provides detailed control functions and application
programming examples.
DriveLogix5730 Controller for PowerFlex 700S Drives
with Phase II Control User Manual,
publication
20D-UM003
Provides instructions for developing DriveLogix controller
projects.
DriveGuard® Safe-Off Option for PowerFlex 700S
Drives with Phase II Control, publication
20D-UM007
Provides information and instructions for properly planning
for and installing the DriveGuard Safe Torque Off option board.
Wiring and Grounding Guidelines for Pulse Width
Modulated (PWM) AC Drives,
publication
DRIVES-IN001
Provides basic information needed to properly wire and
ground PWM AC drives.
PowerFlex AC Drives in Common Bus Configurations,
publication
DRIVES-AT002
Provides basic information needed to properly wire and
ground PWM AC drives using a common DC bus.
Safety Guidelines for the Application, Installation and
Maintenance of Solid State Control,
publication
SGI-1.1
Provides general guidelines for the application, installation,
and maintenance of solid-state control.
A Global Reference Guide for Reading Schematic
Diagrams, publication
100-2.10
Provides a simple cross-reference of common schematic/
wiring diagram symbols used throughout various parts of the
world.
Guarding Against Electrostatic Damage,
publication
8000-4.5.2
Provides practices for guarding against Electrostatic damage
(ESD)
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other
certification details.