Rockwell Automation 20-750-PBUS Profibus DPV1 Option Module - Manual (Page 19)

Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012 19
Chapter
2
Installing the Option Module
This chapter provides instructions for installing the option module in a
PowerFlex 750-Series drive.
Preparing for an
Installation Before installing the option module, do the following:
• Read the Profibus Installation Guideline for details on Profibus networks.
• Verify that you have all required equipment. See
Required Equipment on
page 13 .
Topic Page
Preparing for an Installation 19
Setting the Endianness and Node Address Switches 20
Connecting the Option Module to the Drive 22
Connecting the Option Module to the Network 23
Network Termination 24
Applying Power 25
ATTENTION: Risk of equipment damage exists. The option module
contains electrostatic discharge (ESD) sensitive parts that can be damaged
if you do not follow ESD control procedures. Static control precautions are
required when handling the option module. If you are unfamiliar with static
control procedures, see Guarding Against Electrostatic Damage,
publication 8000-4.5.2.