Rockwell Automation 20-750-PBUS Profibus DPV1 Option Module - Manual (Page 44)

44 Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012
Chapter 4 Configuring the Profibus Master
This action opens a dialog box that allows you to browse for the location of
the GSD file.
2. Select the file to install, and click Open.
If the file already exists in the configuration file path, you will be prompted
to overwrite the file.
3. You will be prompted to associate the GSD configuration file with a
bitmap image of the slave.
4. Use the File/Open dialog box to browse for the location of the image file
to use.
If you have no specific bitmap file, you may Cancel the bitmap upload
which then provides a generic slave icon to use in the Bus Configuration
window for this slave.