Rockwell Automation 20-750-PBUS Profibus DPV1 Option Module - Manual (Page 3)

Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012 3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Added information about the Connected Components Workbench software tool. Throughout
manual
Added Important statement about the larger T15 Torx head mounting screw to step 3 in
the ‘Quick Start’ table. 17
Updated option module mounting information in the section ‘Connecting Option
Module to the Drive’. The larger T15 Torx head screw, if present, on a module in the
adjacent port the left of the 20-750-PBUS module must be replaced with a smaller,
spare T8 Torx head screw to prevent possible electrical contact. 22