Rockwell Automation 20-750-PBUS Profibus DPV1 Option Module - Manual (Page 47)

Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012 47
Configuring the Profibus Master Chapter 4
All the modules from Ctrl/Stat & Ref/Fdbk to Datalink16 can be added as
shown in the example below.
7. Double-click the Slave icon to view the Slave Properties, or right-click the
slave icon and select Object Properties.
The PCB software automatically assigns a Profibus address to each new
slave. The address assignment begins at address 3, and is incremented by 1
for each new slave added to the network.
8. You can change the address in the Common tab of the Slave properties
dialog box.
The address should match the PowerFlex 750-Series drive’s Profibus
address assigned for the specific drive you are configuring. The PCB
software will not allow you to assign a Profibus address that is already in
use by another module on this network.