Rockwell Automation 20-750-PBUS Profibus DPV1 Option Module - Manual (Page 69)

Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012 69
Troubleshooting Chapter 7
27 DL To Net 01 Val The present value of respective Host DL To Net xx parameter being received from the drive by this option module. (If not
using a Datalink, its respective value should be zero.)
28 DL To Net 02 Val
29 DL To Net 03 Val
30 DL To Net 04 Val
31 DL To Net 05 Val
32 DL To Net 06 Val
33 DL To Net 07 Val
34 DL To Net 08 Val
35 DL To Net 09 Val
36 DL To Net 10 Val
37 DL To Net 11 Val
38 DL To Net 12 Val
39 DL To Net 13 Val
40 DL To Net 14 Val
41 DL To Net 15 Val
42 DL To Net 16 Val
43 DPI Rx Errs The present value of the DPI Receive error counter.
44 DPI Rx Errs Max The maximum value (since reset) of the DPI Receive Error counter.
45 DPI Tx Errs The present value of the DPI Transmit error counter.
46 DPI Tx Errs Max The maximum value (since reset) of the DPI Transmit Error counter.
47 Net RX Cnt Number of Profibus telegrams received by Profibus ASIC.
48 Net RX Err Cnt Number of erroneous Profibus telegrams received by the Profibus ASIC since the last time it went into Data Exchange mode.
49 Net RX Terr Cnt Total number of erroneous Profibus telegrams received by the Profibus ASIC since the last power cycle.
50 Boot Flash Count Number of times the boot firmware in the option module has been flash updated.
51 App Flash Count Number of times the application firmware in the option module has been flash updated.
Table 6 - Option Module Diagnostic Items (Continued)
No. Name Description