Rockwell Automation 20-750-PBUS Profibus DPV1 Option Module - Manual (Page 40)

40 Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012
Chapter 4 Configuring the Profibus Master
Configuring the MVI56-
PDPMV1 Profibus DPV1
Master To begin, launch the ProSoft Configuration Builder (PCB) software, which has a
window consisting of a treeview on the left, and information and configuration
panes on the right. When you first launch PCB software, the treeview consists of
folders for Default Project and Default Location, with a Default Module in the
Default Location folder. The ProSoft Configuration Builder window below
shows a new project.
Start configuring the default module by adding the MVI56-PDPMV1 module to
the project.
1. Right-click Default Module in the treeview and choose ‘Choose Module
Type’.
This action opens the Choose Module Type dialog box.