Configuring the mvi69- pdpmv1 profibus dpv1 master, Configuring the mvi69-pdpmv1 profibus dpv1 master – Rockwell Automation 25-COMM-P PowerFlex PROFIBUS DPV1 Adapter User Manual
Page 32
32
Rockwell Automation Publication 520COM-UM004A-EN-E - November 2013
Chapter 4
Configuring the PROFIBUS Master
Configuring the MVI69-
PDPMV1 PROFIBUS DPV1
Master
To begin, launch the ProSoft Configuration Builder (PCB) software, which has a
window consisting of a treeview on the left, and information and configuration
panes on the right. When you first launch PCB software, the treeview consists of
folders for Default Project and Default Location, with a Default Module in the
Default Location folder. The ProSoft Configuration Builder window below
shows a new project.
Start configuring the default module by adding the MVI69-PDPMV1 module to
the project.
1.
Right-click the Default Module in the treeview and choose Choose
Module Type
.
The Choose Module Type dialog box appears.
2.
From the Select Module Type pull-down menu, choose MVI69-
PDPMV1
.