Rockwell Automation 25-COMM-P PowerFlex PROFIBUS DPV1 Adapter - Manual (Page 6)

6 Rockwell Automation Publication 520COM-UM004A-EN-E - November 2013
Preface Overview
The following conventions are used throughout this manual:
• Parameter names are shown in the format axxx [*]. The a represents the
parameter group. The xxx represents the parameter number. The *
represents the parameter name— for example C175 [DSI I/O Cfg].
• Menu commands are shown in bold type face and follow the format Menu
> Command. For example, if you read “Select File > Open,” you should
click the File menu and then click the Open command.
• RSLogix 5000 (version 20) was used for the screen captures in this manual.
Different versions of the software may differ in appearance and
procedures.
• The Studio 5000™ Engineering and Design Environment combines
engineering and design elements into a common environment. The first
element in the Studio 5000 environment is the Logix Designer
application. The Logix Designer application is the rebranding of RSLogix
5000 software and will continue to be the product to program Logix 5000
controllers for discrete, process, batch, motion, safety, and drive-based
solutions. The Studio 5000 environment is the foundation for the future
of Rockwell Automation engineering design tools and capabilities. It is the
one place for design engineers to develop all the elements of their control
system.