Downloading the project to the module – Rockwell Automation 25-COMM-P PowerFlex PROFIBUS DPV1 Adapter User Manual
Page 39
Advertising
Rockwell Automation Publication 520COM-UM004A-EN-E - November 2013
39
Configuring the PROFIBUS Master
Chapter 4
7.
Click on the Parameter assignment tab.
8.
Click the value for the DP Mode parameter in the value column. From the
pull-down menu, choose DPV1 (default).
9.
Click the value for the Diagnostic Alarm parameter in the value column.
From the pull-down menu, choose Enabled.
Downloading the Project to the Module
Follow these steps to download the project to the MVI69-PDPMV1 Master.
1.
In the Online menu, select Download Configuration.
Advertising