Grounding considerations, Chapter summary – Rockwell Automation 440R Guardmaster EtherNet/IP Network Interface User Manual User Manual
Page 17
Advertising
Rockwell Automation Publication 440R-UM009B-EN-P - February 2014
17
Install a Guardmaster EtherNet/IP Network Interface
Chapter 2
Grounding Considerations
The grounding and bonding must be of equal potential between all devices in the
communication coverage area.
Chapter Summary
In this chapter, you learned how to install and wire your Guardmaster EtherNet/
IP network interface. The following chapter describes how to configure your
Guardmaster EtherNet/IP network interface to communicate on the EtherNet/
IP network by providing an IP address, gateway address, and Subnet mask.
ATTENTION: If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
Advertising