Rockwell Automation 440R Guardmaster EtherNet/IP Network Interface User Manual - Manual (Page 58)

58 Rockwell Automation Publication 440R-UM009B-EN-P - February 2014
Appendix D Tag Definitions
Table 11 - GSR GLP Module Input Tags
Name Data Type Definition
Slotx_GSR_GLP_S12_S22_Status BOOL S12, S22 Status – Indicates whether two channel
input channel S12/S22 is On or Off.
0 = The two channel input is Off.
1 = The two channel input is On.
Slotx_GSR_GLP_SingleWireSafetyIn BOOL Single Wire Safety Input Status – Indicates
whether the Single Wire Safety input (L12) is On or
Off.
0 = The Single Wire Safety input signal is Off.
1 = The Single Wire Safety input signal is On.
Slotx_GSR_GLP_LockRequest_S44 BOOL Lock Request S44 Indication – This indication
whether the Lock Request input (S44) is On or Off.
0 = The Lock Request input is Off.
1 = the Lock Request input is On.
Slotx_GSR_GLP_UnLockRequest_S54 BOOL Unlock Request S54 Indication – This indication
whether the Unlock Request input (S54) is On or Off.
0 = The Unlock Request input is Off.
1 = the Unlock Request input is On.
Slotx_GSR_GLP_RecoverableFault BOOL Recoverable Fault Status – Toggles On (1) for one
scan when the safety relay has detected unexpected
operation of a monitored safety device. See Gate
Open Fault, Invalid Switch Setting, Lock Request Gate
Open Fault, Overspeed SL2, Overspeed SL1, Lock
Request Held On, and UnLock Request Held On (
page
59 ) for details.
0 = No fault
1 = Fault
Slotx_GSR_GLP_NonRecoverableFault BOOL Non-Recoverable Fault Status – Toggles On (1) for
one scan when the safety relay has detected
unexpected internal operation or failed a pulse check.
See NonRecoverableFault_A and
NonRecoverableFault_B (
page 59 ) for details.
0 = No fault
1 = Fault
Slotx_GSR_GLP_51 BOOL 51 Status – Indicates whether terminal 51 is On or
Off.
0 = The terminal is Off.
1 = The terminal is On.
Slotx_GSR_GLP_L61 BOOL L61 Status – Indicates whether terminal L61 is On or
Off.
0 = The terminal is Off.
1 = The terminal is On.
Slotx_GSR_GLP_Y32 BOOL Y32 Status – Indicates whether terminal Y32 is On or
Off.
0 = The terminal is Off.
1 = The terminal is On.
Slotx_GSR_GLP_S11 BOOL S11 Status – Indicates whether terminal S11 is On or
Off.
0 = The terminal is Off.
1 = The terminal is On.
Slotx_GSR_GLP_S21 BOOL S21 Status – Indicates whether terminal S21 is On or
Off.
0 = The terminal is Off.
1 = The terminal is On.
Slotx_GSR_GLP_L11 BOOL L11 Status – Indicates whether terminal L11 is On or
Off.
0 = The terminal is Off.
1 = The terminal is On.