Configure the ab_eth/ip driver – Rockwell Automation 440R Guardmaster EtherNet/IP Network Interface User Manual User Manual
Page 48
Advertising
48
Rockwell Automation Publication 440R-UM009B-EN-P - February 2014
Appendix C
Configure the RSLinx Ethernet Communication Driver
Configure the AB_ETH/IP
Driver
To configure the AB-ETHIP Ethernet communication driver, perform the
following steps.
1. Start the RSLinx software.
2. From the Communications menu, select Configure Drivers.
3. Select EtherNet/IP Devices from the list and click Add/New...
Advertising