Rockwell Automation 440R Guardmaster EtherNet/IP Network Interface User Manual User Manual
Page 49
Advertising
Rockwell Automation Publication 440R-UM009B-EN-P - February 2014
49
Configure the RSLinx Ethernet Communication Driver
Appendix C
The Configure Driver dialog box opens.
Make sure the Browse Local Subnet button is selected.
The RSLinx software browses your local subnet and automatically reads
the IP address.
4. Click OK.
The AB-ETHIP driver is now configured and appears in the configured
drivers window.
5. Close the RSLinx software
.
Advertising