Rockwell Automation 440R Guardmaster EtherNet/IP Network Interface User Manual - Manual (Page 46)

46 Rockwell Automation Publication 440R-UM009B-EN-P - February 2014
Appendix C Configure the RSLinx Ethernet Communication Driver
Configure the AB_ETH
Driver
To configure the AB-ETH Ethernet communication driver perform the
following steps:
1. Start the RSLinx software.
2. From the Communications menu, select Configure Drivers.
3. Select Ethernet Devices from the list and click Add/New...
4. Select the default driver name (for example, AB_ETH-1) or type in a
name and click OK.
The Configure driver
dialog opens.