Rockwell Automation 440R Guardmaster EtherNet/IP Network Interface User Manual - Manual (Page 31)

Rockwell Automation Publication 440R-UM009B-EN-P - February 2014 31
Automation Controller Communications Chapter 4
2. Select the 440R-ENETR, then click Create.
3. Enter a name for the Guardmaster EtherNet/IP network interface. The
name will create tags in RSLogix 5000 that can be used to read data from
the Guardmaster Safety Relays being scanned by the Guardmaster
EtherNet/IP network interface.
4. Enter the IP address of the Guardmaster EtherNet/IP network interface.
5. Select Change to configure the Guardmaster safety relays monitored by
the Guardmaster EtherNet/IP network interface.