Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 18)

18 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Chapter 1 Basic Configuration
2. Change the user name and password.
See Appendix B for recommendations.
3. Click Apply Changes.
4. Cycle power to the switch to load the new user name and password.
The administrative password applies to Telnet, FTP, and the web browser
interface.
Work with Miscellaneous
Settings Use these steps to configure miscellaneous switch settings.
1. From the navigation pane, expand the Basic Configuration folder and
select Miscellaneous to display the Miscellaneous tab.
2. Use the information in
Table 3 to configure the settings.
3. Click Apply Changes.
IMPORTANT The 1783-EMS switch does not load the new settings until power is
cycled.