Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 72)

72 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Appendix C Factory Reset
Reset IP Address To reset only the IP address, use this procedure.
1. With power applied, push the reset button with a small screwdriver.
2. Hold the button in for 30 seconds.
3. Cycle power to complete the IP reset.
Your IP address defaults to 192.168.1.1.
Change Settings to Default To change all settings back to default, use this procedure.
1. Remove power.
2. Push the reset button with a small screwdriver.
3. Apply power while continuing to hold the reset button.
4. Hold the button in for 30 seconds.
5. Cycle power to complete the reset.