Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 80)

80 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Appendix E Add the Switch to Software
View Identification and Status Information
From Module Properties dialog box, click the Module Info tab. The Module Info
tab displays identification and status information for the 1783-EMS switch. The
information appears when the Logix controller is in Run mode only.
• To refresh the identification and status on the tab, click Refresh.
• To reset the 1783-EMS switch (communication to the module will be
interrupted), click Reset Module.
Configure Network and Port Settings
From the Module Properties dialog box, click the Port Configuration tab.