Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 45)

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013 45
Diagnostics Chapter 3
RSTP Report If Rapid Spanning Tree Protocol (RSTP) mode is set to Enabled or STP
Compatible on the RSTP Configuration tab, the STP/RSTP status for all switch
ports appears on the RSTP Report tab.
To access the RSTP Report tab, from the navigation pane, expand the
Diagnostics folder and click RSTP Report. The Clear Statistics button lets you
reset the data on the page without having to cycle power after testing.
For more information about configuring STP/RSTP, refer to STP/RSTP on
page 53 .
IGMP Report Internet Group Management Protocol (IGMP) manages membership in IP
multicast groups. Only hosts in that group receive the packet. IGMP prevents a
multicast packet from behaving like a broadcast (transmitted to all network
hosts).
The switch manages a report of IGMP groups and hosts belonging to those
groups, along with querier information, IGMP states per VLAN, and
neighboring routers.
To access the report, from the navigation pane, expand the Diagnostics folder and
click IGMP Report.