Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 38)

38 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Chapter 2 Network Services Setup
8. Open your routine window (for example, MainRoutine) and insert an
MSG instruction.
9. Select the SendEmail MESSAGE tag.
10. Double-click the MSG block and choose source (EMS_EMAIL) and
destination (EmailDstStr) tags.
In our example, we have GetAttributeValue and SetAttributeValue tags and
GetAttribute/SetAttribute MESSAGE tags for individual attribute
handling.
Message sending is triggered by the trigger_send BOOL tag. The message
is sent when you press Ctrl+T in the rung or set the tag value to 1.