Email and sms error codes – Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual User Manual

Page 41

Advertising
background image

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013

41

Network Services Setup

Chapter 2

Email and SMS Error Codes

Examine the destination element of the email MSG to see if the email was
successfully delivered to the mail relay server.

This indicates that the mail relay server placed the email message in a queue for
delivery. It does not mean the intended recipient successfully received the email
message.

This table shows possible codes that could be in this destination element.

Table 4 - Error Codes

Error Code (hex)

Extended-error Code
(hex)

Description

0x00

None

Delivery successful to the mail relay server.

0x02

Resource unavailable. The email object was unable to obtain
memory resources to initiate the SMTP session.

0x08

Unsupported Service Request.
Make sure the service code is 0x4B and the class is 0x32F.

0x11

Reply data too large. The Destination string must reserve
space for the SMTP server reply message.
The reply can be 470 bytes max.

0x13

Configuration data size too short. The Source Length is less
than the Source Element string size plus the 4-byte length.
The Source Length must equal the Source Element string size
+ 4.

0x15

Configuration data size too large. The Source Length is greater
than the Source Element string size plus the 4-byte length.
The Source Length must equal the Source Element string size
+ 4.

0x19

Data write failure.
An error occurred when attempting to write the SMTP server
address (attribute 4) to nonvolatile memory.

0xFF

0x0100

Error returned by email server; check the Destination string
for reason. The email message was not queued for delivery.

0x0101

SMTP mail server not configured. Attribute 5 was not set with
a SMTP server address.

0x0102

To: address not specified.
Attribute 1 was not set with a To: address with no To: field
header in the email body.

0x0103

0x0103 From: address not specified. Attribute 2 was not set
with a From: address and no From: field header in the email
body.

Advertising
This manual is related to the following products: