Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 83)

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013 83
Add the Switch to Software Appendix E
Configure IGMP
From the Module Properties dialog box, click the IGMP tab to configure
Internet Group Management Protocol (IGMP) using these fields:
• Enable IGMP—Enables the IGMP feature in the 1783-EMS switch. See
Chapter 2 of this manual for additional information.
• Version—Select from version 1 or version 2. See
Chapter 2 of this manual
for additional information.
• Query Period—Select the interval rate that the network is queried for
IGMP information.
IMPORTANT Settings made on the IGMP tab overwrite settings made on the web
interface. If you are scanning the 1783-EMS switch with Logix software, use
the IGMP tab to configure IGMP to avoid confusion.