Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 42)

42 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Chapter 2 Network Services Setup
0xFF 0x0104 Unable to connect to SMTP mail server set in Attribute 5. If the
mail server address is a hostname, make sure that the device
supports DNS and a Name Server is configured.
If the hostname is not fully qualified, for example, mailhost
and not mailhost.xx.yy.com, then the domain must be
configured as xx.yy.com.
Try ping <mail server address> to be sure the mail server is
reachable from your network.
Also try telnet <mail server address> 25 to attempt to
initiate a SMTP session with the mail server via telnet over
port 25. If you connect, enter 'QUIT'.
0x0105 Communication error with SMTP mail server. An error
occurred after the initial connection with the SMTP mail
server.
See the ASCII text following the error code for more details on
the type of error.
0x0106 SMTP mail server hostname DNS query did not complete. A
previous send service request with a hostname as the SMTP
mail server address did not yet complete.
Note that a timeout for a DNS lookup with an invalid
hostname can take up to 3 min.
Long timeouts can also occur if a domain name or name
server is not configured correctly.
0x0107 No DNS entry.
0x0108 DNS not configured.
0x0109 GW not configured.
0x0110 System fail (socket error).
Table 4 - Error Codes
Error Code (hex) Extended-error Code
(hex) Description