Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 34)

34 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Chapter 2 Network Services Setup
Use these steps to set up SMTP server parameters.
1. From the navigation pane, expand the Network Services Setup folder and
select Email Configuration.
2. In the IP or Hostname field, type your SMTP server name or IP address.
3. If authentication is used, as required by most ISPs, check SMTP
Authentication and type your user name and password.
Basic authentication, compatible with POP servers, is supported, and the
name and password entered here are those associated with your outgoing
email account.
4. Test sending an email message from the Send an Email web page making
sure that the 1783-EMS switch is connected to a network that has access to
your email server, which may require access to the Internet.
IMPORTANT A status message providing the result of this operation is displayed at
the bottom of the page. Detailed error descriptions let you identify a
potential anomaly.