Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 75)

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013 75
Appendix
E
Add the Switch to Software
The method for adding the switch to software depends on your version of the
software.
Generic Profile Use the switch with the Logix platform only. To add the switch to RSLogix 5000
software, version 13.04.00 or earlier, by using the generic profile, follow this
procedure.
1. Right-click your Logix Ethernet card under the I/O configuration section
of your program and choose New Module.
2. From the list, choose Generic Ethernet Module.
Software Method
RSLogix 5000, version 13.04.00 or earlier Generic Profile, as described on page 75
RSLogix 5000, version 15.02.00 or later
or
Logix Designer, version 21.00.00 or later Add-on Profile, as described on page 77