Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch User Manual - Manual (Page 33)

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013 33
Network Services Setup Chapter 2
MAC Address Labels MAC address labels let you associate a user-friendly label to a MAC ID within
the 1783-EMS user interface. When a label is associated with a MAC ID, it is
reflected in the MAC ID table and the MAC ID management interface. This
feature eases troubleshooting a network. The labels are reflected in the MAC
Address Report and the MAC ID Management Configuration page.
To access the MAC Address Label tab, from the navigation pane, expand the
Network Services Setup folder and select MAC Address Labels.
Email Configuration The 1783-EMS switch includes an embedded email client that uses an email relay
server or gateway message server to send email and text messages to a mail
recipient, mobile telephone, or portable wireless device.
The network gateway address and DNS information must be entered on the
Network Configuration tab. This setup is required once and is stored in 1783-
EMS nonvolatile memory. See
Set the IP Address for help setting up the network
addresses. For help locating these IP addresses, see your network administrator.
IMPORTANT If you do not intend to use symbolic names, for example, [email protected],
but rather only IP addresses to access your mail server, you can leave the DNS
configuration empty.