Rockwell Automation 1769-IR6 Compact I/O 1769-IR6 RTD/Resistance Input Module - Manual (Page 22)

22 Rockwell Automation Publication 1769-UM005B-EN-P - March 2012
Chapter 2 Quick Start for Experienced Users
6. Monitoring module operation
The modules maximum current draw is shown below.
(1) The system power supply could be a 1769-PA2, -PB2, -PA4, -PB4, or the internal power supply of a MicroLogix
1500 packaged controller.
.
Step 1:
Ensure that your 1769 system power supply
(1)
has sufficient current output to
support your system configuration.
Reference
Chapter 3
(Installation and Wiring)
5V DC 24V DC
100 mA 45 mA
TIP The module cannot be located more than 8 modules away
from the 1769 system power supply.
Step 2: Attach and lock the module. Reference
Chapter 3
(Installation and Wiring)
TIP The modules can be panel or DIN rail mounted. Modules
can be assembled before or after mounting.
ATTENTION: Remove power before removing or
inserting this module. When you remove or insert a
module with power applied, an electrical arc may occur.