Rockwell Automation 1769-IR6 Compact I/O 1769-IR6 RTD/Resistance Input Module - Manual (Page 95)

Rockwell Automation Publication 1769-UM005B-EN-P - March 2012 95
Module Addressing and Programming with MicroLogix 1500 and RSLogix 500 Appendix A
Configuration options for channels 0…2 are located on a separate tab from
channels 3…5, as shown below. To enable a channel, click its Enable box so
that a check mark appears in it. For optimum module performance, disable any
channel that is not hardwired to a real input. Then, choose your Data Format,
Input Type, Filter Frequency, Open Circuit response, and Units for each
channel. You can also choose to disable cyclic lead compensation for each
channel. For more information on cyclic lead compensation, see Selecting
Cyclic Lead Compensation (Bit 4) on page 60.
Use the Calibration tab (Cal) to disable cyclic calibration. For more
information on the autocalibration feature, see Selecting Enable/Disable
Cyclic Autocalibration (Word 6, Bit 0) on page 65.