Rockwell Automation 1769-OF4VI Compact I/O Isolated Analog Modules - Manual (Page 101)

Publication 1769-UM014B-EN-P - May 2010
Configuration Using the RSLogix 5000 Generic Profile for CompactLogix Controllers C-5
9. Click OK to complete the configuration of your I/O module.
You may choose to inhibit the module or have the controller fault if the
connection to this I/O module fails. The defaults for these two
parameters are not to inhibit the module and not to fault the controller
should an I/O module connection fail.
You may now click Finish to complete the configuration of your analog output
module. If you click Next, you will see the Module Information screen, which
is only filled in when you are online with your controller. If you clicked Next to
get the Module Information screen, click Finish to complete the configuration
of your I/O module.
Configure each analog I/O module in this manner.
TIP
Refer to the Help screens in RSLogix 5000 software, under
Connection Tab Overview for a complete explanation of
these features.