Rockwell Automation 1769-OF4VI Compact I/O Isolated Analog Modules - Manual (Page 102)

Publication 1769-UM014B-EN-P - May 2010
C-6 Configuration Using the RSLogix 5000 Generic Profile for CompactLogix Controllers
Configure I/O Modules
Once you have created Generic Profiles for each analog I/O module in your
system, you must then enter configuration information into the Tag database
that has been automatically created from the Generic Profile information you
entered for each of these modules. This configuration information is
downloaded to each module at program download, going to run, and at power
cycle.
This section shows how and where to enter configuration data for each analog
I/O module, once Generic Profiles have been created for them.
You must first enter the Controller Tag database, by double-clicking Controller
Tags in the upper portion of the controller organizer. The example to follow
demonstrates entering configuration data for 1769-OF4I module.
For demonstration purposes, Generic Profiles have been created for
1769-IF4I, -OF4CI, and -OF4VI modules. The Controller Tags screen looks
like the following: