Rockwell Automation 1769-OF4VI Compact I/O Isolated Analog Modules - Manual (Page 103)

Publication 1769-UM014B-EN-P - May 2010
Configuration Using the RSLogix 5000 Generic Profile for CompactLogix Controllers C-7
Tag addresses are automatically created for configured I/O modules. All local
I/O addresses are preceded by the word Local. These addresses have the
following format:
 Input Data: Local:s.I
 Output Data: Local:s.O
 Configuration Data: Local:s.C
where s is the slot number assigned the I/O modules in the Generic
Profiles.
In order to configure an I/O module, you must open up the configuration tag
for that module by clicking on the plus sign to the left of its configuration tag
in the tag data base.
Configure Analog Output Modules
To configure the 1769-OF4CI or -OF4VI module in slot 1, click on the plus
sign left of Local:1.C. Configuration data is entered under the Local:1.C.Data
tag. Click the plus sign to the left of Local:1.C.Data to reveal the 32 integer
data words where configuration data may be entered for the 1769-OF4CI or
-OF4VI module.
Configure Analog Input Modules
To configure the input modules in slot 2, click on the plus sign left of
Local:2.C. Click on the plus sign to the left of Local:2.C.Data to reveal the 26
integer data words where the configuration data may be entered for the
module. The tag addresses for these 4 words are Local:2.C.Data[0] through
Local:2.C.Data[3].