Rockwell Automation 1769-OF4VI Compact I/O Isolated Analog Modules - Manual (Page 11)

Publication 1769-UM014B-EN-P - May 2010
Overview 1-3
Figure 1.2 Isolated Analog Modules’ Hardware Features
Table 1.2 Isolated Modules’ Feature Descriptions
Item Description
1 Bus lever (with locking function)
2a Upper-panel mounting tab
2b Lower-panel mounting tab
3 Module status LEDs
4 Module door with terminal identification label
5a Movable bus connector with female pins
5b Stationary bus connector with male pins
6 Nameplate label
7a Upper tongue-and-groove slots
7b Lower tongue-and-groove slots
8a Upper DIN-rail latch
8b Lower DIN-rail latch
9 Write-on label for user identification tags
10 Removable terminal block (RTB) with finger-safe cover
10a RTB upper retaining screw
10b RTB lower retaining screw
10a
10b
4
10
2b
3
2a 1
5a
9 5b
6
7a
7b
8b
7b
8a
7a
1769-IF4I
DANGER
Do Not Remove RTB Under Power Unless Area is Non-Hazardous
Ensure Adjacent Bus Lever is Unlatched/Latched Before/After Removing/Inserting Module
N/C
Ch3+
N/C Ch3-
Ch1+
Ch1-
N/C
Ch3_iRtn
N/C Ch0+
Ch0-
Ch2+
Ch2-
Ch0_iRtn
N/C
Ch2_iRtn
N/C
Ch1_iRtn
OK
Analog
OK
Analog