Rockwell Automation 9323-PA1E QUICK START GUIDE APS 6.0 User Manual
Page 24
Advertising
![background image](/manuals/580091/24/background.png)
Control Basics
2–7
Similarly, output addresses have the form
O:e/b
where
O
= Output data file
:
= Element or slot delimiter
e
= Slot number of the output module
/
= Bit or terminal delimiter
b
= Terminal number used with output device
Examples:
I:1/0
= Input, slot 1, terminal 0
I:2/0
= Input, slot 2, terminal 0
O:3/0
= Output, slot 3, terminal 0
O:3/7
= Output, slot 3, terminal 7
O:0/7
= Output, slot 0, terminal 7 (fixed controllers only because of slot 0)
I:0/4
= Input, slot 0, terminal 4 (fixed controllers only because of slot 0)
Eventually, you will be addressing other data files, such as Status, Bit, Timer,
Counter, Control, Integer, String, ASCII, and Float. Addressing of these files is
discussed in the APS programming manual.
Advertising