Rockwell Automation 9323-PA1E QUICK START GUIDE APS 6.0 - Manual (Page 42)

Preface
APS Quick Start for New Users
4–2
Restoring (Downloading) a Processor File
There are two tasks to complete in restoring processor file GETSTART to the
processor:
•
Check the Online Configuration parameters.
•
Go online and download (restore) processor file GETSTART.
The procedures begin at the APS menu display.
Check the Online Configuration Parameters
Complete these steps:
1. Access the Online Configuration window.
Press
CONFIG OFFLINE
CONFIG
ONLINE
CONFIG
F2
. From the menu, choose a 1747-PIC (DH-485) by cursoring
to it and pressing
CONFIG OFFLINE
CONFIG
DRIVER
CONFIG
F2
. This display appears:
Press a function key
F1 Port COM1
Current Device 1747-PIC (DH-485)
F3 Baud Rate 19200
F4 Terminal Address 0
F5 PROC Address 1
F6 MAX Node Address 31
F9 Save to File
F3
BAUD
RATE
F5 F6
PROC
ADDRESS
MAX
ADDRESS
F1
PORT
F2
SELECT
DEVICE
F4
TERM
ADDRESS
ESC exits/Alt-U aborts changes
ONLINE CONFIGURATION
F9
SAVE TO
FILE
Note This does not apply to SLC 5/04 processors. For these processors, you need to
select a driver that corresponds to your specific hardware configuration. Refer to
the Advanced Programming Software User Manual for more information.