Rockwell Automation 9323-PA1E QUICK START GUIDE APS 6.0 - Manual (Page 35)

Creating a Processor File
3–7
5. Configure the chassis of your controller.
Press
CONFIG OFFLINE
CONFIG
CONFIGR
I/O
F5
. The following option window appears. Note that chassis 1 is
specified as 1746-A4, the default selection. This is correct for our controller. If
you are using a different chassis, press
CONFIG OFFLINE
MODIFY
RACKS
F4
, then
CONFIG OFFLINE
CONFIG 1
F1
RACK
. Select the
appropriate chassis, using the cursor keys, and press [ENTER] . If you are
using more than one chassis, follow the same procedure for chassis 2 and 3.
RACK 1 = 1746-A4 4-SLOT Backplane
RACK 2 = NOT INSTALLED
RACK 3 = NOT INSTALLED
SLOT CATALOG # CARD DESCRIPTION
*0 1747-L524 5/02 CPU - 4K USER MEMORY
*1
*2
*3
4
5
6
7
8
Press a function key
I/O CONFIGURATION FOR:GETSTART
F6 F7 F4 F5
DELETE
SLOT
UNDEL
SLOT
MODIFY
RACKS
MODIFY
SLOT
F8
EXIT
ESC exits
F1 F2
READ
CONFIG
ONLINE
CONFIG
F9
SPIO
CONFIG
Note the asterisks next to slots 0 thru 3. This indicates that we have configured
these slots and can now configure I/O modules. Slot 0 is already configured
with our processor.