Rockwell Automation 9323-PA1E QUICK START GUIDE APS 6.0 - Manual (Page 65)

Preface
APS Quick Start for New Users
A–8
6. Accept the rung.
Press [ESC] , then
CONFIG OFFLINE
CONFIG
ACCEPT
RUNG
F10
.
7. Enter a third rung and an XIC instruction.
Press
CONFIG OFFLINE
CONFIG
INSERT
INSTR
F4
, then
CONFIG OFFLINE
CONFIG
BIT
F1
, then
CONFIG OFFLINE
CONFIG
XIC
-] [-
F1
. Type the address
T4:0/DN , then press [ENTER] . “DN” represents the timer done bit.
8. Enter an OTE instruction.
Press
CONFIG OFFLINE
CONFIG
BIT
F1
, then
CONFIG OFFLINE
CONFIG
OTE
-( )-
F3
. Type the address O:3/4 , then press
[ENTER] .
9. Accept the rung.
Press [ESC] , then
CONFIG OFFLINE
CONFIG
ACCEPT
RUNG
F10
, then [ESC] .
10. Exit the edit mode.
Press [ESC] .