Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 100)

7–6 Creating Multistate Indicators and Drawing Lines
Publication 2711E-818 – January 1998
4. Choose OK.
The Configure Multistate Indicator dialog box reappears. You can
now assign the control, which can be a tag or an expression. For
the purposes of this tutorial, assign a tag.
To assign the Indicator State:
1. Choose Assign Tag.
2. The Tag Browser appears.
You must create a new tag for this object.
3. Choose New Tag.
See Chapter 6 for information about creating new tags. Create
and assign the tag shown in the following illustration. This time
you’ll want to use an analog tag because the values range from 0
to 4. For the address, use the one shown, or assign any binary
output address using three bits.