Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 35)

2–14 Setting Up PanelBuilder 1400e
Publication 2711E-818 – January 1998
8. To proceed with installation, choose Continue. To cancel the
installation, choose Exit.
9. If the C:\RSI\CMN directory already exists, an Installation dialog
box appears, indicating the files in the C:\RSI\CMN directory
will be updated. Click Yes to begin the installation.
10. Follow the setup instructions as they appear on the screen.
To complete the setup, enter any required information and insert
disks when prompted. Continue this procedure until you have
installed all disks.
11. After the installation is complete, you will be prompted to reboot
your computer. You can reboot immediately or later, but you must
reboot before you can run PanelBuilder 1400e successfully.
If you want to transfer application files between a computer and
the PanelView terminal, you must install the File Transfer Utility.
For instructions on how to install this utility, see Chapter 2 in the
PanelView 1200/1400e Transfer Utility User Manual. If you
choose to install the File Transfer Utility and you want to upload
or download PanelView files over the PLC networks, you also
need to install INTERCHANGE or WINtelligent LINX software.
If you do not have this software, contact Allen-Bradley Technical
Support for assistance.
If you want to upgrade the firmware on your PanelView terminal
using your computer, you must install the Serial Firmware
Upgrade Utility. For instructions on how to install this utility, see
Appendix D in the PanelView 1000e, 1200e, and 1400e Operator
Terminals User Manual.
The PanelBuilder 1400e program group also contains a Readme file.
This file contains version-specific information, PanelView file
migration notes, and system installation and software registration
information. We recommend you read this file before proceeding.
You can also print the file.
To read the file:
" Choose the Readme icon.
The README.TXT file appears on your screen.
To print the file:
1. Choose the Readme icon.
2. Choose Print from the File menu.
Accessing the
PanelBuilder 1400e
Readme File