Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 92)

6–8 Creating Control List Selectors and Tags
Publication 2711E-818 – January 1998
3. Double-click the default address in the Address field to highlight
it, then type i:032/10 .
The values are:
This value Means this
i Input
03 Rack 3
2 Word 2
/10 10th Bit
4. Choose Accept.
The Tag Editor closes and the Tag Browser reappears. The tag
you just created is selected automatically.
5. Choose OK in the Tag Browser to assign the tag. The tag appears
to the right of the Selector Control in the Configure Control List
Selector dialog box.
6. Choose OK again in the Configure Control List Selector dialog
box to accept the changes and close the dialog box.
The tag is assigned.
The Validate feature helps you identify any problems in the screen,
such as overlapping objects. When you’ve finished editing the
screen, you should validate it.
To validate the screen:
" Choose Screen Validate from the Screen menu or press F9.
The Validation Results for Screens window appears. If there are
any errors or problems in the screen, it lists them. The screen
validation box shown below indicates that the screen is error-free.
Validating the Screen