Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 89)

6–5 Creating Control List Selectors and Tags
Publication 2711E-818 – January 1998
Configuring the Control List Selector without Enter Key
To configure the Control List Selector without Enter Key:
1. Select the entire object. Choose Configure Screen Object from
the Edit menu or from the toolbar. Or, double-click the
object or press the right mouse button.
The Configure Control List Selector dialog box appears.
2. In the Name field, type Stapler . This description of the
object’s function is useful if you want to document the
application in a report.
Since the Control List Type field is already set to Control List
Selector without Enter Key, you don’t need to change this field.
The Initial State field determines the state that the object is set to
when the screen is displayed. The stapling option has two states:
0 (No) and 1 (Yes). Because you don’t want stapling as the
default, accept the value of 0 in the Initial State field.
Tip: You can change the states’ default values (0 and 1) to other
numbers. However, for this example, these values are appropriate.
You’ll notice two timing parameter fields: Auto-Repeat Rate and
Auto-Repeat Start Delay. By default, the Auto-Repeat field has a
value of 0. This means that it is disabled. If the button is held
down, it will not go into repeat mode. For this application, the
defaults are appropriate.
"