Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started User Manual
Page 30
2–9
Setting Up PanelBuilder 1400e
Publication 2711E-818 – January 1998
You can install any or all of the following options:
•
PanelBuilder 1400e
•
Help files
•
Demo files—These files demonstrate sample PanelBuilder
1400e applications.
•
Tutorial files—These files are required for the tutorial outlined
in this manual.
The following files are part of the install set and can’t be
deselected:
•
OLE/ODBC System Files—These files are necessary for
running PanelBuilder 1400e.
If disk space is limited, you may want to install only PanelBuilder
1400e. However, if you have enough space, we strongly
recommend you also install the Help files.
12. If the C:\RSI\CMN directory already exists, an Installation dialog
box appears, indicating the files in the C:\RSI\CMN directory
will be updated. Click Yes to continue with the installation.
13. When the files have finished loading, an Installation dialog box
appears to confirm completion. Click OK to continue. If you have
chosen other applications to install, the next selected application
automatically begins to install.
14. After all the applications have completed installing, you will be
prompted to reboot your computer. You may reboot immediately
or later, but you must reboot before you can run PanelBuilder
1400e or other applications successfully.