Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 12)

Preface P–6
Publication 2711E-818 – January 1998
Before you begin, you should already have installed and know how
to operate this equipment and software:
•
a personal computer with at least a 486, 25-MHz microprocessor;
at least 8 MB Random Access Memory (RAM) (16 MB RAM
recommended); and a SVGA monitor with 256 colors
(recommended). For users working with imported .dxf files, at
least 16 MB RAM is required.
Note: Windows 3.1 and 95 require a minimum of 8 MB RAM
although 16 MB are highly recommended. Windows NT requires
a minimum of 32 MB RAM to run successfully.
If you want to resize graphic images in PanelBuilder, set your
display adapter to 65,536 colors.
•
Microsoft Windows 3.1 operating system or later, Windows 95, or
Windows NT
•
the family of PLCs you’ll be monitoring and controlling
If you have questions about PanelBuilder, please consult the manuals
or Help first. If you can’t find the answer, take advantage of our
Technical Support Fax Back system, available 24 hours a day, 7 days
a week at 1-440-646-5436, or browse through our technical support
document library at http://www.ab.com/mem/prodserv/services/
technotes/techmain.html on the World Wide Web.
Alternatively, contact:
Allen-Bradley
Technical Support
1 Allen Bradley Drive
Mayfield Heights, Ohio 44124-6118
or call 1-440-646-6800 or fax 1-440-646-6890 for technical support
between 8
AM and 5 PM (EST), Monday to Friday.
Please have the serial number for your software ready when you call,
or include it on your fax. You can find this number:
•
on the Software Registration card that was shipped with your
software
•
on the screen that appears when you start PanelBuilder
•
in the main Help menu, when you choose “About”
Before You Begin
"
Technical Support
Services